Ball screw 50 kN ZA-series
Ball screw 50 kN
Electromechanical Actuator ZA | 50 kN 40x5 Ball screw:
Technical specifications
| 50 kN | |
| 1500 rpm | |
| 1800 rpm | |
| 40x5 | |
| 27.5 | |
| 63.6 | |
| 0.06 | |
| GGG-50, corrosion-resistant | |
| Steel, case-hardened, ground | |
| steel | |
| Steel chrome plated | |
| 31.5 kg | |
| 3.6 kg | |
| Synthetic fluid grease | |
| Grease lubrication | |
| max. 60°, higher on request | |
| N: 2.82 kg cm² / L: 1.75 kg cm² | |
| max. 31.5 Nm (N) / max. 10.4 Nm (L) | |
| max. 260 Nm |
Electromechanical Actuator ZA | 50 kN 40x10 Ball screw:
Technical specifications
| 50 kN | |
| 1500 rpm | |
| 1800 rpm | |
| 40x10 | |
| 46.1 | |
| 71.3 | |
| 0.06 | |
| GGG-50, corrosion-resistant | |
| Steel, case-hardened, ground | |
| steel | |
| Steel chrome plated | |
| 31.5 kg | |
| 3.6 kg | |
| Synthetic fluid grease | |
| Grease lubrication | |
| max. 60°, higher on request | |
| N: 2.82 kg cm² / L: 1.75 kg cm² | |
| max. 31.5 Nm (N) / max. 10.4 Nm (L) | |
| max. 260 Nm |
Electromechanical Actuator ZA | 50 kN 40x20 Ball screw:
Technical specifications
| 50 kN | |
| 1500 rpm | |
| 1800 rpm | |
| 40x20 | |
| 44 | |
| 80.4 | |
| 0.06 | |
| GGG-50, corrosion-resistant | |
| Steel, case-hardened, ground | |
| steel | |
| Steel chrome plated | |
| 31.5 kg | |
| 3.6 kg | |
| Synthetic fluid grease | |
| Grease lubrication | |
| max. 60°, higher on request | |
| N: 2.82 kg cm² / L: 1.75 kg cm² | |
| max. 31.5 Nm (N) / max. 10.4 Nm (L) | |
| max. 260 Nm | |
| 2.86mm | |
| 7:1 |
Data sheet and Catalogues | Products from ZIMM:
- Data sheet | Electromechanical Actuator 50 kN from ZIMM
- Catalogue | Electromechanical Actuators from ZIMM
- Catalogue | Permissible Loads Actuators from ZIMM
- Catalogue | Lubrication for Electromechanical Actuators from ZIMM
Contact EIE Maskin for more information about our products and ordering: